Browse all practice questions for the EPRI Core Protection NANTeL Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

EPRI Core Protection NANTeL Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • For a moderate LOCA in a BWR, which set of systems are involved in the ECCS response?
  • Post-accident instrumentation must be environmentally qualified to withstand which conditions in the post-LOCA containment atmosphere?
  • Which LOCA scenario is used as an example of a DBA-BWR?
  • How do post-trip signals and data logging support plant safety and analysis?
  • The original goal of PRA includes which of the following?
  • How might environmental monitoring influence the operation of the core protection system?
  • Which statement regarding MSPI use is true for Systems Engineers?
  • Which factor is central to anomaly monitoring in cyber security for safety-critical I&C?
  • How are calibration and drift addressed for core protection sensors?
  • Which critical safety function protects the containment barrier?
  • Possible radiation exposure paths include:
  • How do you ensure that trip annunciations reflect actual protective actions during a scram?
  • Describe logic fault tolerance in RPS/NANTeL.
  • Safety limits are established to:
  • How does NANTeL ensure software integrity for safety-critical logic?
  • If safety significant parameters deviate too far, protective actions may be automatic trip or relief; sometimes both.
  • BWRs and PWRs have what to remove hydrogen from containment?
  • Which regulatory limit is cited as the boundary for off-site exposure in emergency planning?
  • How is cross-channel data integrity verified in NANTeL?
  • Evacuation of the public is only recommended if a ________ is declared.
  • What is a tool used to evaluate risk / safety significance and is useful when making decisions regarding plant operation?
  • What is the most prevalent hydrogen source after a design basis LOCA (chronic source of hydrogen)?
  • Which components are included in a formal software lifecycle for safety-critical systems?
  • What type of engineer uses PRA when installing new safety-related equipment?
  • Which group uses PRA when: Installing new safety-related equipment to the plant; Adding a backup cooling supply to a piece of safety-related equipment; Changing control room indications; Replacing an AOV with an MOV; Changing failure mode of equipment?
  • What is the role of alarm annunciations during a core protection event?
  • What is the primary objective of robust fault detection in NANTeL?
  • The focus of accident mitigation is which of the following?
  • During natural circulation, what is true about steam generator pressures?
  • The optimal recovery concept aims to minimize which two things?
  • What is the primary purpose of 'hot standby' hardware in a protection system?
  • Which ECL is described as actual or potential substantial degradation of the level of safety of the plant?
  • Which barrier is the first fission product barrier?
  • PRA uses a mathematical model of all important plant systems being used in the plant.
  • How do you interpret a degradation in one protection channel while others remain healthy?
  • BWRs use which gas in their dry wells to prevent a flammable mixture of O2 and H2?
  • Which option lists all three ways the core cannot fully remove heat created by the fuel?
  • Why are test and surveillance frequencies specified in safety system design important?
  • The Baseline for plant configuration to mitigate the various design basis events is described by which item?
  • What is the purpose of channel voting in core protection?
  • What is the role of regulatory guidance (e.g., NRC standards) in NANTeL system design?
  • Which document requires that reactor coolant and containment samples be obtained and analyzed within hours after an accident and that instruments be environmentally qualified to withstand the post-LOCA containment atmosphere?
  • What is meant by 'safety-related hardware' and how is it protected from tampering?
  • Which of the following is a critical parameter monitored during accident conditions in a PWR?
  • What are surveillance tests and what do they verify?
  • Which of the following is a conservative assumption used to bound the design basis events?
  • Which arrangement best achieves safety function independence?
  • The operators scan safety significant parameters; if automatic trip or relief should have taken place, operating procedures will have operators take action.
  • In a pressure event, protective actions may include relief valves; depending on design, it could relieve or trip first.
  • What four critical safety functions protect the RCS pressure boundary?
  • Explain the term 'graceful degradation' in safety systems.
  • Surface Contamination can result in contamination of which three areas?
  • How can alarm thresholds be adjusted in response to environmental monitoring?
  • What is the purpose of separation of duties and access control for safety systems?
  • Probabilistic Risk Assessment (PRA) is defined as which of the following?
  • FSAR stands for Final Safety Analysis Report.
  • Which role uses PRA when providing basis for risk-informed Technical Specifications?
  • A Design Basis Accident (DBA) is typically which of the following?
  • What is the purpose of cross-channel checks in sensor calibration and protection logic?
  • Which mechanism ensures that changes to safety-related software are verified by an independent party?
  • Which item is a safety limit specifically used to prevent Departure from Nucleate Boiling in a Pressurized Water Reactor (PWR)?
  • What is the role of independent verification in safety-related hardware protection?
  • Which system responds in a BWR during a small LOCA to ECCS?
  • Which barrier prevents the escape of fission products from cladding?
  • Which term describes the plant's licensing limit that the design aims to stay below to ensure safety margins?
  • Which task is typical of Design Engineers using PRA?
  • Which term is used as an alternate designation for PRA?
  • Plant modifications have no effect on the plant's core damage frequency (CDF).
  • Which barrier holds radionuclides that have escaped from the RCS?
  • Large early release frequency is the probability of a significant radiation release within the early phase after an accident.
  • What is the original goal of PRA?
  • What is the minimum subcooling requirement for RCS loops?
  • Which barrier is the third fission product barrier?
  • During a PWR shutdown, steam is not sent to the turbine to generate electricity.
  • What is the primary use of PRA in plant decision-making?
  • Most plant parameters have controls that keep them within established setpoints - this represents which layer of protection for safety significant parameters?
  • What is the first line of defense in nuclear safety?
  • What is the purpose of independent software verification in safety-critical systems like NANTeL?
  • Which of the following is a BWR indication of a DBA?
  • Which of the following lists the four Emergency Classification Levels?
  • Which group uses PRA for incorporating the Maintenance Rule (10 CFR 50.65)?
  • All alarms or actions before this point should prevent the equipment from reaching the Tech Spec Limit. The plant licensing basis.
  • What is a trip bypass, and under what circumstances might it be used in core protection?
  • Defense-in-depth Accident Prevention relies on which of the following described in the FSAR?
  • _____ and _____ ECL actions are taken before reaching the off-site limits of 10 CFR 20.
  • What is a trip setpoint margin and why is it important?
  • Which of the following is a use case for PRA?
  • What is the second most prevalent hydrogen hazard source and where is it found?
  • The job of the accident analysis in the FSAR is to evaluate the worst radiological accidents and _____.
  • If minimum operability conditions are not met for an LCO, which section informs the operator of actions to take?
  • How does NANTeL address cyber security considerations in modern nuclear I&C?
  • Limits on the specific nuclear process variables imposed by technical specifications to ensure the integrity of the fission product barriers are called what?
  • What is a 'proof-test' and why is it important for NANTeL?
  • Core damage frequency in PRA refers to the probability of which event?
  • Which statement describes the zinc paint hazard source?
  • During natural circulation, what is true about RCS core exit thermocouple temperatures?
  • DBA are accidents that a Nuclear Power Plant must be designed and built to withstand without loss to which of the following?
  • How is the primary safety concern achieved?
  • In a PWR shutdown, the heat sink for steam is typically either the condenser or the atmosphere.
  • Explain the concept of a 'voter' in 2oo3 protection logic and its consequence on tripping.
  • Which option correctly identifies a method used to prevent contamination buildup by lowering pressure and temperature?
  • Which term describes the ongoing monitoring required to verify operability and licensing compliance of an LCO?
  • In a large LOCA in a BWR, ECCS response comprises which combination?
  • Which Emergency Classification Level is described as actual or imminent substantial core degradation or melting with potential for loss of containment integrity?
  • Describe the difference between 'nominal' and 'surveillance' tests in NANTeL.
  • Core Exit Thermocouples Temperatures are monitored in accident conditions for which reactor type?
  • How does degraded channel status influence trip decisions?
  • Which of the following is NOT a listed radiological exposure pathway?
  • PRA stands for which term?
  • State the sequence that correctly represents the first three levels in the hierarchy of safety parameter limits.
  • What is defense-in-depth and how does it apply to core protection?
  • How is safety function independence achieved in NANTeL?
  • Which features contribute to logic fault tolerance in RPS/NANTeL?
  • Which elements are included in the plant's layered protection system?
  • What is the purpose of cross-strapping power supplies in a multi-channel protection system?
  • How does NANTeL ensure proper seismically qualified operation?
  • These specify the minimum acceptable levels of system performance necessary to assure safe operation of the facility.
  • In the hierarchy of safety parameter limits, which item comes directly after "Normal Automatic Controls"?
  • What is the importance of procedural compliance in implementing NANTeL protection?
  • Which ECL is described as potential degradation of the plant's level of safety and escalation to more serious emergencies?
  • What type of engineer uses PRA when providing basis for risk-informed Technical Specifications?
  • Which approach helps NANTeL handle calibration of diverse sensors without cross-talk?
  • Which statement about fission product barriers is correct?
  • What is the meaning of 'defense-in-depth' in the context of plant safety?
  • Probabilistic Risk Assessment (PRA) is also known as which of the following?
  • Which term describes accidents that a nuclear power plant must be designed and built to withstand?
  • What ranks components and systems in their order of risk/importance to the plant?
  • Alarms are typically initiated to notify operator of deviations; actions guided by procedures such as NOPs, AORs, and AOPs. This represents which layer of protection?
  • What is an acceptance test in the context of RPS/NANTeL, and what does it typically include?
  • Which statement about DBA is true?
  • The point where the equipment actually fails is somewhere above the design limit.
  • A key difference between deterministic analysis and PRA is that deterministic analysis is based on conservative assumptions, while PRA uses what?
  • What type of engineer uses PRA when Incorporating Maintenance Rule?
  • Which of the following is a PWR indication of a design basis accident (DBA)?
  • What is the primary safety concern for nuclear power plant operation?
  • Explain 'design basis events' in the context of core protection.
  • Which Emergency Classification Level corresponds to the most severe scenarios requiring the widest protective actions for the public?
  • Accidents are defined as which of the following?
  • What is setpoint drift monitoring and how is it implemented in NANTeL?
  • In PRA design context, adverse consequences are typically defined as what?
  • Identify ways a core can fail.
  • Which statement best describes the purpose of defense-in-depth in nuclear safety?
  • In natural circulation, the RCS cold leg temperature is at the saturation temperature.
  • The FSAR accident analysis aims to ensure radiological effects are within acceptable limits.
  • Which accident type involves an arbitrary rupture of pipes up to complete severance of the largest pipe in the nuclear system process barrier?
  • Which Emergency Classification Level is described as actual or likely major failures of plant functions needed for protection of the public?
  • What two major effects can radiological accidents have on the environment and inhabitants?
  • Containment integrity protects which part of the plant?
  • What is the primary purpose of hardware diversity in NANTeL channel design?
  • Which option best describes the focus of accident mitigation?
  • What is an 'injection test' and how is it used in safety system testing?
  • Which of the following is a critical parameter monitored during accident conditions for a BWR?
  • What is meant by 'integration testing' for NANTeL with other safety systems?
  • Which practice best describes cross-channel data integrity verification in a voting protection system?
  • What does environmental qualification verify?
  • Which system is designed to prevent the contamination building from exceeding design values?
  • How are NANTeL channels tested for functional readiness without causing a reactor trip?
  • Which option lists the four major sections of an LCO?
  • Which layer of protection includes alarms that signal operators to take action before a trip or relief occurs?
  • Which barrier is the second fission product barrier?
  • Which document describes how operators should respond to abnormal operating conditions?
  • Which role uses PRA when Incorporating Maintenance Rule?
  • LOCA stands for Loss Of Coolant Accident.
  • Which barrier contains radionuclides that escaped cladding or were produced outside cladding?
  • Which statement is NOT an attribute of a PRA?
  • Which parameter monitors containment pressure?
  • During natural circulation in a PWR, the RCS hot leg temperatures tend to be
  • What does defense-in-depth embody in core protection?
  • What is the role of instrumentation calibration in preventing incorrect trips?
  • Which statement best describes hydrogen management in containment for both BWR and PWR?
  • PRA is a mathematical model based on industry-generic data for critical components.
  • What is the primary safety concern for nuclear power plant operations?
  • Describe typical operator actions following a reactor scram in an NANTeL-equipped plant.
  • What are the four critical safety functions that protect the fuel pellet and cladding?
  • Which of the following is NOT listed as a mitigation for spurious trips in NANTeL?
  • Which statement about ECL definitions is true?
  • What is a key difference between deterministic analyses and PRA?
  • Why is FMEA important for RPS/NANTeL?
  • This is the highest value for a specified parameter that a piece of equipment is designed to survive and remain operational. In some cases, this is the value where the equipment was tested
  • PRA is used when performing significance determinations within the Significance Determination Process.
  • What is a PRA best described as?
  • RVLIS stands for which system?
  • Which two parameters are used to calculate risk in a PRA?
  • Use PRA when: Supporting justifications for continued operation; Incorporating Maintenance Rule (10 CFR 50.65); Using the Mitigating Systems Performance Index (MSPI); Determining risk factors for on-line work activities; Providing input for plant testing. Which group is this describing?
  • PRA aims to identify plant vulnerabilities after analyzing severe accident behavior. Which of the following best restates this goal?
  • What is the final element in the hierarchy of safety parameter limits?
  • What is the main benefit of procedural compliance in implementing NANTeL protection?
  • Which LOCA scenario is used as an example of a DBA-PWR?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy